Product List

RF Signal Repeater

Power Requirements: 12V DC external transformer supplied (with integrated battery backup)
Backup Battery Life: Approximately 24 Hours
Operating Environment: 0°F to 140°F (-17°C to 60°C), up to 95% relative humidity (non-condensing)
Installation: Wall mounting (optional outdoor enclosure available)
Dimensions: 6.5” x 3.5” x 1.0” (16.5 cm x 8.9 cm x 2.54 cm)

External Sensor: -20°F to 200°F, -28°C to 93°C
0% to 99% RH (+/- 2% between 10% & 90% RH)
Temperature Accuracy: +/- 2°F
Enclosure Size: 3.5” x 1.7” x 0.9” (8.9 cm x 4.3 cm x 2.29 cm)
Enclosure Weight: Approx. 3.0 oz (85 grams)
Installation: Snaps to Base Plate. Base Plate mounts with screws or double-stick tape
Operation Battery Type: “2/3 A” size LiMn02 (e.g., Duracell DL123A)
Battery Life: Up to 2-5 years
Operating Environment: 0°F to 140°F (-17°C to 60°C), up to 95% relative humidity (non-condensing)
Open Field Range: 2500 feet (762 meters)
Fast Burst Complete message in < 30ms, transmitting for < 4% of that
time

Internal Sensor Probe: 0°F to 140°F, -17°C to 60°C range
Standard External Sensor Probe: -20°F to 200°F, -28°C to 93°C, terminal block allows for a remote sensor
Accuracy: +/- 1°F (external), +/- 2°F (internal)
Other specialized external probes available:

Enclosure Size: 3.5” x 1.7” x 0.9” (8.9 cm x 4.3 cm x 2.29 cm)
Enclosure Weight: Approx. 3.0 oz (85 grams)
Installation: Snaps to Base Plate. Base Plate mounts with screws or double-stick tape
Operation Battery Type: “2/3 A” size LiMn02 (e.g., Duracell DL123A)
Battery Life: Up to 2-5 years
Operating Environment: 0°F to 140°F (-17°C to 60°C), up to 95% relative humidity (non-condensing)
Open Field Range: 2500 feet (762 meters)
RF Specifications: U.S.: ISM 900 MHz, FHSS (902-928 MHz) @ 50mW (Transmitter configurable to European, Australian or New Zealand RF standards via on-sensor jumper setting)
Fast Burst: Complete message in < 30ms, transmitting for < 4% of time

Power Requirements: Base Station: 11-14 Volts DC, 60 Hz, 80 mA., external transformer supplied
Buffer: 12 Volts DC, 60Hz, external transformer supplied
Output Signal: DB9 RS-232 Serial (Base Station)
DB9 RS-232 Serial or 10/100 Base-T Ethernet (Buffer)
Output Connection: DB9 connector / RJ-45 Ethernet
Operating Environment: 32°F to 140°F (0°C to 60°C), Up to 95% relative humidity (non-condensing)
Memory Buffer Capacity: 2 MB (Hourly sensor snapshot recordings with automatic recovery in the event of a PC or network failure)
Installation: Wall mounting, indoor
Dimensions: 6.5” x 3.5” x 1.0” (16.5 cm x 8.9 cm x 2.54 cm